How to Replace AirTag Battery

Apple’s AirTag is a handy tool for tracking lost items, but like any electronic device, it requires occasional maintenance. One important aspect is replacing the battery when it runs low. Fortunately, changing the AirTag battery is a quick and straightforward process. In this Blog, you’ll learn everything you need to know about how to replace the AirTag battery, what type of battery to use, and a few tips to ensure your device stays in optimal working condition.

How Long Does an AirTag Battery Last?

AirTags are powered by a CR2032 lithium coin battery, which can last up to one year under normal usage conditions. Once the battery gets low, your iPhone will alert you with a notification that it’s time to replace it.

Luckily, replacing the battery is easy, and it doesn’t require any special tools.

What You’ll Need to Replace the AirTag Battery

Before diving into the step-by-step process, here’s what you need:

• CR2032 coin cell battery: This is a common battery used in many small devices. Make sure the replacement battery doesn’t have a bitter coating, as some CR2032 batteries with this coating may not work properly with AirTags.

That’s it! No additional tools or accessories are necessary.

Steps to Replace AirTag Battery

Follow these simple steps to replace the battery in your AirTag:

1. Remove the AirTag from Its Holder
If your AirTag is attached to a keychain, bag, or any accessory, remove it so that you can work with the device directly.

2. Press and Twist the Back Cover
To access the battery compartment:

• Hold the stainless steel back of the AirTag with two fingers.
• Press down gently on the back cover.
• Twist counterclockwise (to the left) until the cover loosens and pops off.

3. Remove the Old Battery
Once the cover is removed, you’ll see the battery inside the AirTag. Simply take out the old CR2032 battery and dispose of it properly.

4. Insert the New Battery
Place the new CR2032 coin cell battery into the AirTag with the positive (+) side facing up. Make sure the battery sits snugly in place. You should hear a small chime when the new battery is successfully installed, indicating the AirTag is functioning properly.

5. Replace the Back Cover
Align the three tabs on the stainless steel cover with the slots on the AirTag. Press down gently on the cover and twist it clockwise (to the right) until it locks securely in place.

And that’s it! Your AirTag should now be working with a fresh battery, ready to help you track your items for another year.

How to Know When the AirTag Battery Is Low

Your iPhone will notify you when the AirTag battery is running low with a pop-up message. Additionally, you can check the battery status manually in the Find My app:

1. Open the Find My app on your iPhone.
2. Select your AirTag from the list of items.
3. Check the battery icon under the AirTag name. If it shows a low battery, it’s time for a replacement.

Troubleshooting AirTag Battery Replacement Issues

Sometimes, you may run into problems when replacing the battery. Here’s how to troubleshoot some common issues:

• AirTag not chiming: If the AirTag doesn’t make a chime sound after inserting the new battery, double-check that the battery is inserted with the positive side facing up.
• Battery doesn’t fit: Make sure you are using a CR2032 battery without any coatings. Some batteries come with a child-safe bitter coating, which may prevent them from working with the AirTag.
• Back cover won’t close properly: Ensure that the battery is placed correctly and that the three tabs on the cover are aligned with the slots on the AirTag.

Where to Buy CR2032 Batteries

CR2032 batteries are widely available at most electronics stores, supermarkets, and online retailers. Here are some common places you can find them:

• Amazon
• Walmart
• Best Buy
• Target

Make sure to purchase from a reputable source to avoid counterfeit or low-quality batteries that may not last as long.

How to Maximize AirTag Battery Life

While the battery life of an AirTag is already impressive, there are a few ways you can extend it:

1. Reduce the frequency of tracking updates: Limiting how often the AirTag sends location updates can conserve battery power.
2. Avoid exposure to extreme temperatures: Excessive heat or cold can drain the battery faster.
3. Remove from low-use items: If an AirTag is attached to an item that you don’t use often, consider removing the battery to save power until you need it again.

Conclusion

Replacing the AirTag battery is a simple process that takes only a few minutes, ensuring your device continues to track your belongings reliably. By following the steps outlined above and using the correct battery, you can easily maintain your AirTag without any hassle.

With proper care, your AirTag will last for years, keeping your important items secure and trackable. Remember to regularly check the battery status and replace it as needed to avoid any interruptions in service.

FAQs

Q1: How often do I need to replace the AirTag battery?
On average, the AirTag battery lasts about a year, but this can vary depending on usage.

Q2: What type of battery does the AirTag use?
The AirTag uses a CR2032 lithium coin battery, which is widely available in stores and online.

Q3: Can I replace the AirTag battery with any CR2032 battery?
Yes, but avoid batteries with a bitter coating, as they may not work properly with AirTags.

Q4: Will replacing the AirTag battery reset my device?
No, replacing the battery won’t affect the AirTag’s settings or tracking data.

By providing this step-by-step guide and keeping your AirTag’s battery fresh, you’ll ensure your device stays reliable and effective for all your tracking needs.